In a previous post, I talked about the satellite CAS-2T on a recent Chinese launch. CAS-2T was designed to remain attached to the upper stage of the rocket and decay in a few days. However, due to an error in the launch, the upper stage of the rocket and CAS-2T where put on a long-term 1000km x 500km elliptical orbit. A few days after launch we learned that another satellite, called KS-1Q was also attached to the same upper stage of the rocket. This satellite transmits telemetry on the 70cm Amateur Satellite band.
I haven’t been able to completely decode telemetry from KS-1Q yet, mostly because the satellite team hasn’t given many technical details about the telemetry format. There is a technical brochure in Chinese, but it is not publicly available. I have asked the team if they could send me a copy, but they haven’t replied. Here I report my findings so far in case someone finds them useful.
Continue reading “About KS-1Q”
Last Thursday, a CZ-11 Chinese rocket launched from Jiuquan. Alan Kung BA1DU posted in amsat-bb some minutes after launch saying that this launch contains an Amateur payload: CAS-2T. As it is usual with Chinese Amateur satellites, little information is available publicly and we hadn’t heard about CAS-2T before.
According to BA1DU, CAS-2T is a 2U Cubesat with a CW beacon on 70cm and a V/U FM transponder. The satellite will not separate from the upper stage of the rocket, so it will decay between 10 and 30 days before launch. However, this is not correct. After launch, CAS-2T was identified as object 2016-066E by Mike Rupprecht DK3WN using Doppler measurements. This object is on a 1030km x 500km elliptical orbit, so it will not decay soon. Apparently, due to a problem in the launch, the upper stage of the rocket has being put in this 10 year+ orbit. Indeed, there are radar TLEs for 6 objects from this launch. Four of them are on circular orbits of roughly 500km height, while the other two are on elliptical orbits of 1030km x 500km radius. All of these orbits will last for many years.
Reports of CAS-2T from Amateurs worldwide agree that the CW signal has good strength, but it suffers much fading. Unfortunately, the FM transponder does not function properly. It seems to respond well to an uplink signal, but it doesn’t modulate properly, as if it lacked power or suffered some other problem. On Friday afternoon, I took an SDR recording of the CW and FM signals of CAS-2T during its orbit 25. Here I show some measurements of these signals. The recording was done with a 7 element yagi and a FUNcube Dongle Pro+, and it has been Doppler corrected using the TLE for object 2016-066E, which gives a very good match.
Continue reading “Some measurements of CAS-2T on orbit 25”
I have published a post in the GNU Radio blog about my reverse engineered GNU Radio Outernet receiver gr-outernet. I cover more or less the same information as in a previous post in this blog, but I include lots of screenshots. Many thanks to Ben Hilburn and Johnathan Corgan for contacting me to write this post in the GNU Radio blog and for their useful suggestions.
Head over to the GNU Radio blog and read the post: Reverse-engineering Outernet.
Outernet is a company whose goal is to ease worldwide access to internet content. They aim to provide a downlink of selected internet content via geostationary satellites. Currently, they provide data streams from three Inmarsat satellites on the L-band (roughly around 1.5GHz). This gives them almost worldwide coverage. The downlink bitrate is about 2kbps or 20MB of content per day.
The downlink is used to stream files, mostly of educational or informational content, and recently it also streams some APRS data. As this is a new radio technology to play with, it is starting to get the attention of some Amateur Radio operators and other tech-savvy people.
Most of the Outernet software is open-source, except for some key parts of the receiver, which are closed-source and distributed as freeware binaries only. The details of the format of the signal are not publicly known, so the only way to receive the content is to use the Outernet closed-source binaries. Why Outernet has decided to do this escapes me. I find that this is contrary to the principles of broadcasting internet content. The protocol specifications should be public. Also, as an Amateur Radio operator, I find that it is not acceptable to work with a black box receiver of which I can’t know what kind of signal receives and how it does it. Indeed, the Amateur Radio spirit is quite related in some aspects to the Free Software movement philosophy.
For this reason, I have decided to reverse engineer the Outernet signal and protocol with the goal of publishing the details and building an open-source receiver. During the last few days, I’ve managed to reverse engineer all the specifications of the modulation, coding and framing. I’ve being posting all the development updates to my Twitter account. I’ve built a GNUradio Outernet receiver that is able to get Outernet frames from the L-band signal. The protocols used in these frames is still unknown, so there is still much reverse engineering work to do.
Continue reading “Reverse engineering Outernet: modulation, coding and framing”
LilacSat-1 is one of the satellites that will form part of the QB50 constellation, a network of 50 cubesats built by different universities around the world that will conduct studies of the thermosphere. LilacSat-1 is Harbin Institute of Technology’s satellite in the QB50 constellation, and is expected to launch late this year. Incidentally, his “brother” LilacSat-2 launched in September 2015, and it has become a popular satellite because of its Amateur Radio FM repeater.
Apparently, LilacSat-1 will feature a very novel transponder configuration: FM uplink and Codec2 digital voice downlink. I have discovered this yesterday while browsing the last updates to the Harbin Institute of Technology gr-lilacsat github repository. In fact, there is no mention of digital voice in the IARU coordination page for LilacSat-1. According to the coordination, the transponder will be mode V/U (uplink in the 144MHz band and downlink in the 435MHz band). However, it seems that only downlink frequencies have been coordinated with IARU. Hopefully the uplink frequency will lie in the satellite subband this time. LilacSat-2 is infamous because of its uplink at 144.350MHz, which lies in the SSB subband in the Region 1.
Codec2 is the open source digital voice codec that is used in FreeDV. This makes LilacSat-1 very exciting, because Codec2 is the only codec for digital voice radio that is not riddled with patents. Moreover, it performs much better than its main competitor: the AMBE/IMBE family of codecs, which are used in D-STAR, DMR and Yaesu System Fusion. Codec2 can achieve the same voice quality as AMBE using roughly half the bitrate.
Harbin Institute of Technology has recently published a GNUradio decoder for the Codec2 downlink and an IQ recording to test the decoder. Here I take a quick look at this code and I talk a bit about the possibilities of using Codec2/FreeDV in satellites.
Continue reading “LilacSat-1 Codec 2 downlink”
It turns out that the satellites AISAT and ATHENOXAT-1 use the NanoCom U482C transceiver from GomSpace. This is the same transceiver that GOMX-1 uses, so the same decoder can be used.
I’ve added example flowgraphs and wav recordings to gr-ax100 and complete decoders to gr-satellites. Note that there is no telemetry parser yet, because I don’t have the telemetry format used by these satellites. Thanks to Jan PE0SAT for sending me an AISAT recording and to Roland PY4ZBZ for sending an ATHENOXAT-1 recording (note that this satellite is on a low inclination orbit, so it can only be received near the equator).
I’m on the lookout for any other satellites using the NanoCom U482C transceiver or the NanoCom AX100 transceiver (this is the transceiver that GOMX-3 uses), as it should be possible to decode them with gr-ax100.
GOMX-1 is a 2U cubesat from GomSpace that was launched in November 2013 into a sun-synchronous orbit. As far as I know, it was the first satellite with an ADS-B receiver payload. It transmits telemetry on the 70cm Amateur band, including some data from the ADS-B receiver, as GOMX-3 does. Some Amateurs, including me, had tried to decode its telemetry on several occasions, without success. GOMX-3 will decay in about 4 weeks, as it was launched from the ISS on October 2015. Therefore, it now becomes more interesting to decode GOMX-1, which is in a longer term orbit. After one more serious try, I’ve been able to decode the telemetry. This is the first time that an Amateur decodes telemetry from GOMX-1 completely. The decoder code can be found in gr-satellites and gr-ax100, including an example wav file in
Continue reading “Decoding GOMX-1 telemetry”
The family of BEESAT satellites from the TU Berlin transmit telemetry on the Amateur bands using the Mobitex-NX protocol. Some of the BEESAT satellites also include a digipeater using this same protocol. There is a GNUradio implementation from TU Berlin of a software TNC for these satellites. This software has some shortcomings (for instance, FEC decoding wasn’t working properly). I’ve made my own fork where I’ve fixed some of the problems. Here I’ll talk about various aspects of the Mobitex-NX protocol and the GNUradio implementation.
Continue reading “Some notes on BEESAT and Mobitex-NX”
In the previous post I’ve talked about HORYU-4 CW telemetry. Here I report my findings when trying to decode 1200baud AFSK telemetry. Since the satellite transmits digital telemetry only over Japan, the recordings I’ve analysed have being kindly provided by Tetsurou JA0CAW. There is a telemetry format document from Kyutech, but as it is the case with the CW document, it is rather incomplete and lacks several important details.
Continue reading “A brief try at decoding HORYU-4 1k2 AFSK telemetry”
HORYU-4 is a small satellite from Kyushu Institute of Technology (Japan) designed to test a high voltage solar array in space and observe the effects produced by the charge on the spacecraft due to the high voltage. It transmits telemetry on the 70cm and 13cm amateur bands. It has a CW beacon at 437.375MHz, a 1200baud AFSK telemetry downlink at 437.375MHz and a 100kbaud BPSK telemetry downlink at 2400.3MHz. The digital telemetry downlinks are only active over Japan and use a custom packet format. Here we take a brief look at the format of the CW telemetry.
Continue reading “HORYU-4 CW telemetry format”