It turns out that the satellites AISAT and ATHENOXAT-1 use the NanoCom U482C transceiver from GomSpace. This is the same transceiver that GOMX-1 uses, so the same decoder can be used.
I’ve added example flowgraphs and wav recordings to gr-ax100 and complete decoders to gr-satellites. Note that there is no telemetry parser yet, because I don’t have the telemetry format used by these satellites. Thanks to Jan PE0SAT for sending me an AISAT recording and to Roland PY4ZBZ for sending an ATHENOXAT-1 recording (note that this satellite is on a low inclination orbit, so it can only be received near the equator).
I’m on the lookout for any other satellites using the NanoCom U482C transceiver or the NanoCom AX100 transceiver (this is the transceiver that GOMX-3 uses), as it should be possible to decode them with gr-ax100.